1 How to audit your bookkeeper's work before a funding round
ritaevenden667 edited this page 3 hours ago


Knowing how to audit your bookkeeper's work before a funding round is less about catching fraud and more about proving that the numbers tie. Start with the bank reconciliations, then move to receivables, payables, payroll and tax balances, and revenue timing. The main condition is that the review happens before an investor or lender asks, since a rushed check under deal pressure rarely finds the errors that matter.

Start with the bank reconciliations, because every other number depends on them


A bank reconciliation compares the cash balance in the books with the balance on each bank and card statement, line by line. When it is done well, the difference is zero or explained by items in transit, such as checks not yet cleared. Lenders and investors usually ask for it early, because if cash does not tie, nothing built on top of it can be trusted.


Ask your bookkeeper for the reconciliation of every account, not only the main operating account. Many businesses also have a savings account, a payroll account, a payment processor deposit account and one or two credit cards. Each one needs its own reconciliation, dated to the same statement period, with the matching bank statement attached.

List every bank, card, payment processor and payroll account in one place. Record the last reconciliation date for each account and the statement behind it. Flag any reconciling item that is older than the current period. Ask for the support behind every manual adjustment.


Next, look at the reconciling items. Deposits in transit and outstanding checks are normal, but they should clear within a short window. A check written months ago and still listed as outstanding is a symptom. The likely cause is a payment recorded twice, voided in the software without reversing the entry, or never sent. The correction is to trace each old item to its source document and clear it.


Pay close attention to plugs. A plug is a manual entry that forces the book balance to match the bank without a clear explanation. It is the fastest way to make a reconciliation look finished, and it is the first thing a careful reviewer will question. If you find one, ask for the transaction behind it. A general note such as "adjustment" is not an answer.


Get this list in place first, before you review anything else: every account, its last reconciliation date and the statement that supports it. That list becomes your working map. It also shows whether the bookkeeper is keeping up with the monthly close or working from memory of the last few months.

Receivables that look healthy on paper but never turn into cash


The most common symptom is an accounts receivable report full of invoices that are months old, while the bank balance stays flat. On paper the business looks like it is collecting. In practice, the customers may have paid, but the payments were never applied to the invoices, or the invoices were never closed after a credit memo. The report is showing money that is already in the bank.


The likely cause is weak cash application. Payments arrive through a processor, a check or a bank transfer, and someone has to match each one to an invoice. When that step falls behind, unapplied payments sit in a suspense account or on the customer ledger, and the aging report overstates what is owed. The opposite error happens too: a payment applied to the wrong invoice makes one customer look current and another look overdue.


Start by sorting the aging report by customer, not by invoice. Pick the five largest balances and ask for proof of payment on each old invoice, meaning the deposit record or processor statement and the matching ledger entry. Then check for credit memos and write-offs. A write-off recorded in the wrong period can make the balance sheet look cleaner than the business really is.


Ask how bad debt is handled. Some businesses never reserve for doubtful accounts, so a receivable stays on the books at full value long after anyone expects to collect it. Investors will ask about this, and the answer should be a written policy, even a short one, with a named person who decides when an invoice moves to doubtful. Without that, the number is an estimate nobody has defended.


For trade, construction or real estate businesses, check retainage and progress billings separately. Those amounts are often held back until a job closes, and they can sit in receivables for a long time. Label them clearly in the report, so a lender reading the aging does not confuse a normal retention holdback with a customer who has stopped paying.

Payables and cutoff: bills that land in the wrong month


Cutoff is the rule that puts each expense in the month the cost belongs to, not the month the bill was paid or entered. When cutoff slips, monthly profit moves around, and a result that looks strong in one month can flip in the next. A reviewer checks this by comparing month-end payables with the bills received in the first days of the following month.


The symptom is usually an odd pattern in the expense lines. A utility or insurance bill appears every few months instead of every month, or a large vendor invoice lands in a quiet period that does not match the work performed. The likely cause is that the bookkeeper enters bills when they are paid, which works for a cash view but breaks accrual reporting. Some software setups allow both methods, and the choice is often not written down anywhere.


Pull the list of unpaid bills as of the last month end and compare it with the vendor statements. Look for invoices dated before the period end that were entered after it. Those are candidates for accrual. Look also for prepaid items, such as annual software licenses or insurance premiums, that were expensed in full on the day they were paid. That overstates expenses in one month and understates them later.


Check the vendor side for duplicates. A bill entered twice inflates expenses, and a purchase paid by card and then again through accounts payable inflates them further. Open the vendor ledger for your three largest suppliers and scan for the same amount on two different dates. Duplicates are easy to fix once they are found, but they make the cost structure look worse than it is, and that distorts any margin analysis a lender will run.


The last step is to check that the payables aging matches what you owe. Ask each major vendor for a statement, and reconcile the unpaid balance with your ledger. If the two differ, the gap is either a payment not applied or a bill not entered. Either way, the fix belongs in the books before a lender sees the balance sheet, not in a note explaining the difference.

Payroll and sales tax balances that sit in the wrong account


Payroll taxes and sales tax are collected or withheld on behalf of someone else, which makes them easy to mishandle. The money passes through the business. If it is recorded as income or left sitting in a general account, the balance sheet overstates cash and understates liabilities. For a company preparing for a funding round, that gap is exactly what a due diligence team will look for first.


The symptom is often a payroll liability account that carries a balance month after month, or a sales tax payable that looks too small for the sales volume. The likely cause is that the payroll provider's journal entries were posted once and never reconciled, or that sales tax collected through the point-of-sale system was never mapped to the liability account. The correction is to reconcile each liability to the filing that supports it.


In Florida, sales tax returns are filed with the Florida Department of Revenue, and the amount due should match the taxable sales and tax collected for the period. Ask for the last several returns and compare the tax reported with the liability on the books. If the returns were filed on time but the ledger still shows a balance, the payments may have been recorded in the wrong period or the wrong account. A reviewer will want that explained.


For payroll, reconcile the payroll register to the general ledger for each pay date, then compare federal tax deposits with the Internal Revenue Service records. Check that employee withholdings and employer contributions are separated, and that no one has booked a payroll tax payment as a payroll expense. Contractor payments are a separate question. Confirm they are classified as contractor costs rather than wages, and that the required forms were issued. Mixing these categories is one of the most common reasons a review gets delayed.


If the business took a Paycheck Protection Program loan at any point, the ledger should match the documentation kept for that loan, including the payroll costs and the periods they cover. A lender may not ask about it, but a careful reviewer will check, and a mismatch raises doubts about every other entry the bookkeeper has made. Keep that file next to the payroll reconciliations so it is easy to pull.

Revenue timing for deposits, milestones and deferred income under ASC 606


Revenue timing is where a clean-looking monthly profit can hide the most risk. When a customer pays before the work is delivered, the cash arrives first and the revenue comes later. ASC 606 sets the general framework under U.S. GAAP for recognizing revenue when the performance obligation is satisfied. Your bookkeeper does not need to memorize the standard, but the records do need to show the logic behind each entry.

Revenue typeCommon bookkeeping mistakeWhat to check first

Customer deposit or prepaymentRecorded as revenue when the cash arrivesContract terms and a deferred revenue schedule Milestone billingBilled amount treated as earnedMilestone sign-off and the percent of work complete Retainer or subscriptionFull annual amount booked in one monthService periods and monthly recognition entries Progress billing on a jobInvoice recorded before the work is deliveredJob cost reports and completion records


Read the table as a checklist. The first column names the revenue type, the second names the mistake that shows up most often in small-company books, and the third tells you which document to pull. You do not need to rebuild every contract. Start with the largest customer prepayments and the biggest milestone invoices, because they move the monthly numbers the most.


Look at the deferred revenue schedule, if one exists. It should list each prepayment, the amount still unearned and when each part will be recognized. If there is no schedule, the revenue line is probably based on cash received. That can be acceptable for a cash-basis tax return, but it will not hold up with an investor expecting accrual figures. Ask which basis the statements use and write the answer down.


Seasonal businesses face a particular version of this problem. A tourism operator, a landscaping company or a construction firm may collect large deposits in one season and deliver the work in another. A reviewer should see those deposits as liabilities until the service is performed, and the monthly profit should follow the work, not the bank account. Otherwise a strong spring can look like a permanent improvement in the business.


Check the cutoff at the boundary between periods. Revenue for jobs finished on the last day of the month belongs in that month, even if the invoice went out later. Pull the invoices dated in the first week of the next month and confirm that none of them describe work completed before the period end. The check takes little time, and it catches a common pattern in which revenue is pulled forward to make a month look better.


Be careful about interpretation. An accountant can explain how the standard applies to a specific contract, but your review's job is to find where the books and the contracts disagree. If the records cannot show how a large revenue entry was calculated, that is a finding, even before anyone decides whether the entry was right.

Owner draws, personal charges and a chart of accounts that drifted


Owner draw activity and personal spending are where small businesses blur the line between the company and the people who run it. A founder pays a family bill with the company card, the bookkeeper codes it to a general expense, and nobody notices for a year. Investors and lenders treat that as a control problem, because the financial statements no longer show what the business actually spends.


The symptom is a large miscellaneous expense line, or a set of card charges with no business purpose written beside them. The likely cause is that the owner has no clear rule for personal use, and the bookkeeper has no reason to ask. The correction is a written policy: which cards can be used for what, how draws are recorded and how personal charges are repaid. Once that policy exists, the review can check the books against it.


Next, examine the chart of accounts. Over time, software setups grow new accounts for one-off needs, and similar costs end up split across several lines. In QuickBooks, NetSuite or Sage Intacct alike, a chart that has drifted makes trend analysis unreliable, because the same expense appears under different names in different years. Ask for the chart with the date each account was created and, if any, the date it was retired.


Look for accounts used in only one or two months and never again. They are often created to park a single transaction. Ask what each one holds, then move the entries to the accounts they belong in, benefits of a outsourced CFO in Miami with a note in the file explaining the change. Keep the old history intact. A reviewer compares periods, and a silent reclassification can look like manipulation even when it was meant as cleanup.


The last check in this area is related-party transactions. Loans from an owner, rent paid to an entity the owner controls, and shared services between companies must be recorded and described. If any of these exist, write them into a short schedule with the terms. A lender will ask for that schedule, and having it ready shows that the books are kept with the people who will read them in mind.

Close process and audit trail: proving each entry before a review asks


The close process is the routine that turns a month of transactions into reliable statements. It includes reconciliations, accruals, a review of unusual entries and a final sign-off. The clearest sign that a close is weak is that monthly statements arrive late, get revised after they have been shared, or depend on one person who is the only one who understands them.


Ask for the written close checklist. If the bookkeeper has one, read it and see whether each step has a date, a responsible person and a reviewer. If there is no list, that is the finding. A checklist does not need to be long. It needs to show the order in which work happens, so a reviewer can tell whether the statements were built on finished reconciliations or on estimates. Ask these questions while you read it:

Who can post journal entries, and who approves them? Can one person create a vendor, pay that vendor and reconcile the bank account? Are changes to closed periods logged and reviewed? Is there a record of who changed each bank rule or categorization rule? Are login credentials shared between staff members?


These questions touch on segregation of duties and access, which are core internal controls. You are not judging the bookkeeper's character here. You are checking whether the system can produce a trail that another person can follow. In an ERP system such as NetSuite or Sage Intacct, that trail usually exists, but it has to be switched on, reviewed and kept. In a smaller setup, it may depend on a single login that everyone shares.


Test the trail with a sample. Pick three journal entries from the last quarter, one large, benefits of a outsourced CFO in Miami one unusual and one routine, and ask for the support behind each. The support should include the source document, the approval where one is required and the entry itself. If any of the three cannot be traced within a few minutes, the review should go deeper before the statements are shared with anyone outside the company.


If you cannot answer these questions yourself, that is useful information too. Some owners bring in an outside reviewer, or a fractional or interim CFO, to run the review and set up the close. Others prefer to handle it with their own staff. Either choice is yours to make. The work is the same in both cases: a close that someone else can follow, with records that match the bank and the contracts.

A worked example: reviewing a hypothetical Miami distributor's books before a loan meeting


Consider a hypothetical Miami distributor of building supplies that is discussing a line of credit with a lender. The owner wants the numbers to be clean, and the bookkeeper has run the books for several years without a formal review. The approach here is order benefits of A Outsourced cfo in miami operations, not a full audit of every transaction. Each step builds on the one before it.


Step one is the bank. The review collects every bank, card and processor account, then confirms that each reconciliation ties to its statement. In this example, the operating account reconciles, but the card account carries two old outstanding items that nobody has explained. The likely cause is a card refund entered as a deposit. The correction is to trace the refund, reverse the wrong entry and record the card payment in the period it cleared.


Step two is receivables. The aging report shows three customers with invoices older than their normal terms. Two of them have paid, but the payments were never applied, so the report overstates what is owed. The third has a credit memo that was never posted. After the fixes, the receivables balance drops, and the write-off question becomes a clear decision for the owner rather than a hidden assumption in the numbers.


Step three is tax and payroll. The sales tax liability has carried a balance for several months, even though the returns were filed on time. The payments were recorded in a general expense account, so the liability looks unpaid. The fix is a reclassification with the filed return attached, which brings the liability in line with the filings. Payroll reconciles without changes, but contractor payments are recorded as wages, which a lender would question. Those entries move to contractor costs, with the required forms on file.


Step four is the audit trail. Two journal entries from the last month lack support. One is a large inventory adjustment, and the other is a transfer from the owner. The owner locates the documents for the transfer, and the count sheet for the inventory adjustment turns up in a storage folder. Both entries go into the file with approval notes. The owner also sets a rule that personal card charges are repaid through a draw, not coded as business expenses.


The result is a shorter list of open questions, not a finished pitch. The lender still asks about the trend in margins and the seasonal swing in cash, but the owner now has those answers in a clear package. The example shows the method: start with the bank, move through receivables, payables, taxes and revenue, then check the trail. Each step produces a finding, a correction and a note, and that combination is what makes the books easier to trust when someone outside the company reads them.